Initial configuration of the network settings
18
· RemoteAccess-CPU series
2. Make sure that the IP address of the computer’s network interface is part of the
subnet to which the IP address of the device belongs.
3. Switch on the target module.
Starting the web application
How to configure the settings of a network interface:
1. Start the computer's web browser and enter the URL
192.168.0.1
in the address line.
2. Enter the following data in the login mask of the target module:
3. Click on
Login
.
4. Click on the
Config Panel 21
icon.
Configuring the »Network« interface
How to configure the settings of the
Network
interface:
1. In the menu, click on
Remote Gateways
.
2. Click on the target module and then click on
Configuration
.
3. Click on the tab
Network
.
4. Select the section
Interfaces
.
NOTE:
Use the IP address
192.168.0.100
, for example.
Username:
Enter a username.
Password:
Enter a password for your user account.
IMPORTANT:
Change the administrator account's default password.
The
default
access data to the administrator account are:
Username:
Admin
Password:
See
login
information on the label on the bottom of the device
NOTE:
The
Link Local
address space 169.254.0.0.0/16 is reserved for internal com-
munication between devices according to RFC 3330. It is not possible to assign an
IP address of this address space!
