»RemoteAccess-CPU« target module
RemoteAccess-CPU series ·
7
English
Installation
Connecting a target computer
Network:
Plug in a category 5e (or higher) twisted-pair cable.
Connect the other end of the cable with the network (Gigabit Ethernet).
Connection to a matrix switch
Trans.:
Use a category 5e (or higher) twisted-pair cable to connect the interface with
one of the
dynamic ports (RJ45)
of the matrix switch.
Power supply
Power In:
Plug the connection cable of the power pack into this interface.
Connect the power cable with the power pack and a power socket.
NOTE:
Place the target module only upright (see sketch below) or at a 90° angle to
the left or right.
NOTE:
The fan draws the outside air into the device
at the front
. Warm air is emitted
at the rear
ventilation openings.
IMPORTANT:
Make sure that all virtual machines can be accessed via this inter-
face.
Network
Power In
Service
Power
Trans.
