6
Procedure
■
Lifting uses pulse mode instead of continuous mode. Select the mode switch as
Pulse(P) in main body.
•First, clean the skin before the procedure. During the lifting procedure, there are
nothing to applied to the skin. But if necessary, apply the appropriate primer,
high-frequency cream, lifting cream, etc.
•The appropriate output level is set according to the application site and purpose
to prevent unnecessary discharge.
2
Tip Installation
Rotate the head cap counterclockwise to loosen it slightly, insert the lifting tip
into the collet, and turn the head cap clockwise to secure the tip to the collet.
1
Head Cap
Lifting Tip
Dragging
Slowly massage the
wrinkles along the line.
Tapping
Move vertically and tap
Your skin like a dot.
Brushing
Touch the skin surface
like a brushing.
⚫
When using the pulse (P) mode, use the output intensity in the range of
1~5 and do not use more than 5. Pulse mode has a frequency output of
500Hz specially designed for lifting, so over 5 cycles can cause unnecessary
skin irritation.
CAUTION
!
Lifting for Wrinkle Improvement
and Collagen Regeneration
HOW TO USE
- PART 1 :
