7
■
Tip installation is same as Lifting tip installation. The procedure,
it takes 15minutes as shown below.
Tapping by Fractional Tip
–
5min
After installing the fractional tip first, clean the treatment are and remove the
water , Set the continuous(C) mode and the output intensity to 3~5, then move
the tip and tapping lightly.
1
■
High Frequency is generated at
the multipoint part of the
fractional tip and the skin layer
is opened to prepare the
cosmetics to absorb.
Apply cosmetics
Apply cosmetics evenly.
2
1
st
Absorbent massage by Permeating Tip
–
5min
After replace with a permeating tip, Continuous(C) mode and the output
strength 5~7, then move the tip and gently massage.
3
■
High Frequency is generated
between the permeating tip and
the skin surface and the
electroporation effect, cosmetic
will be penetrated into the deep
skin.
2
nd
Absorbent massage by Fractional Tip and Finishing
–
5min
After replace with a Fractional Tip, Pulse (P) mode and output strength 3~5, then
move the tip and tapping lightly.
4
■
High Frequency is generated at
the multipoint part of the
fractional tip and promote the
absorption of residual active
ingredients remaining after using
the permeating tip and this is a
final stage to performs skin tissue
lifting by pulse.
PULSE
Permeating Tip for Cosmeti Abs
Fractional Tip
HOW TO USE
- PART 2 :