GCE 0870613, Instructions For Use Manual

Page: 11 / 136

EN
11/136
6. TROUBLE SHOOTING
Failure Cause Repair
Drive
wheel does not
turn
Cable connections are loose Check the solder of the cables.
Defective commutator Check the cable connection.
Check the commutator with a
test device.
Failure of the main electric cable Check the main electric cable
with a test device.
Defective motor Check it with a test device.
Check if the motor spindle
rotates.
Ragged
Cutting
Surface
(see also adjust-
ment recommen-
dation below)
A ragged surface
Unfitting rail Make sure that the surface to be
cut is smooth enough for the
rail to fit
Rotating speed of the motor is
wrong
Check or replace the control
units.
External vibration Stop vibrations
Wrong cutting parameters
adjustments
Check the speed of cutting with
the ruler.
Abnormal delays in propulsion
gear component
Repair it or get it repaired.
Distortion of the torch Replace it.
7. STORAGE, CARRYING AND TRANSPORTATION
7.1. PACKING
GCE proFIT
®
SLM is surrounded by preser-
vations all around the box. Cutting machine
body is in the box separated from the ac-
cessories; the box is divided into two parts.
7.2. STORAGE
If the cutting machine is not going to be
used for a long time, keep the electric
components, torch and nozzles in the box to
protect them from dust, humidity and other
impurities.
7.3. CARRYING
Keep the product in the box to prevent
failures arising from shocks and vibrations during carrying.
7.4. TRANSPORTATION
Keep the product properly in its box to prevent it from damages during transportation. Storage,
carrying and transportation
Fig 9. An example of packing