GCC Technologies StellarMark C Series, User Manual

Page: 96 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
92
To clean the scan lens, simply remove the scan lens and inspect it for light and
heavy residue marks.
To clean light residue marks, apply some lens cleaner on each side of the lens.
Use a new, lint free cloth to remove the lens cleaner. Make sure that the cloth
only travels in one direction to prevent scratching the scan lens. Let the lens
dry before reattaching it to the StellarMark
TM
. Be sure to clean only one side
at a time.
To clean a heavy residue mark, apply some lens cleaner on each side of the
lens. Use a cotton swab to remove the caked on residue mark. Be careful
not to scratch the lens. Use acetone if the lens cleaner will not remove the
mark. After the mark is removed, follow the steps used to clean light residue
marks in order to finish the cleaning.
NOTE
Never touch the scan lens with your bare hand. The oils from your
hand will distort the laser beam passing through the lens. Use finger
cots or rubber gloves when cleaning.
.
Acetone is an EXTREMELY FLAMMABLE LIQUID AND VAPOUR.
The vapour is heavier than air and may spread long distances making
distant ignition and flashback possible.
WARNING