![GCC Technologies StellarMark C Series User Manual Download Page 14](http://html1.mh-extra.com/html/gcc-technologies/stellarmark-c-series/stellarmark-c-series_user-manual_3889343014.webp)
StellarMark CIIS/CIIP Series User
’
s Manual
10
•
Always wear safety goggles when the laser system is in operation.
Reflective materials such as mirrors, enameled brass and anodized
aluminum may partially-reflect some of the invisible laser radiation. Severe
eye damage may occur if appropriate safety goggles are not worn.
•
Connect the machine to a properly grounded power outlet. Ensure the
voltage of the power source is identical to the voltage of the machine.
•
Do not attempt to modify or disassemble the laser module.
•
Do not attempt to remove or modify any component of the machine’s laser
interlock safety system.
•
Ensure the immediate work area of the machine is well-ventilated. Odors,
vapors, and dust are byproducts generated during the laser marking and
cutting process. An exhaust system is recommended. Please contact
GCC or your local GCC distributor for more information.
•
Do not laser heat-sensitive surfaces or materials that may generate toxic
fumes, such as PVC and Teflon.
•
Regularly clean and maintain your machine according to our cleaning and
maintenance instructions. Doing so will ensure a machine that will operate
effectively and safely over a long period of time.
NOTE
Each LaserPro laser machine is shipped with a single pair of safety goggles.
If additional safety goggles are required, please contact GCC directly or an
authorized GCC distributor. If you wish to purchase one on your own,
please make sure the safety goggles meet these requirements:
190 - 398 nm OD5+
10,600 nm OD5+
Visible Light Transmission: 92.9%
Summary of Contents for StellarMark C Series
