GCC Technologies StellarMark C Series, User Manual

Page: 81 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
77
Step 4. If there is barrel square, go back
to the “lens setup” to correct it.
Step 5. If the figure becomes protuberant in X-axis, the X value will need to
be increased like 0.002; while if now it become indentation, the X
value will have to be reduced to as 0.0014.
Keep adjusting the value until it is acceptable.
Step 6. If the square is trapezoid, go back
to the “lens setup” to correct the
irregular square.