GCC Technologies StellarMark C Series, User Manual

Page: 87 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
83
9.1 I/O Pin Assignment
I/O TYPE DESRIPTION
O1~O8 OUTPUT There are 8 output signals (StellarMark
→
External
device) available to communicate with external devices.
Alarm
(Out)
OUTPUT
➢
When Alarm is inactivated, the laser marker will
send signal out.
➢
When Alarm is activated, the laser marker will send
out a signal out .
➢
When marking software is opened, the Alarm will be
activated and laser marker will send a signal out in
the beginning of work. Until the “Execute” button
is pressed and the
“Marking” window jumps out on
marking software, then alarm will change to
“inactivated” (laser marker will send a
signal out).
Ready
(Out)
OUTPUT
➢
When G-Mark Advance software is opened, it will
send out a signal out.
➢ When the “Marking” window jumps out and laser
Marker is ready to fire; it will send a signal out.
➢
When laser marker is firing, it will send a signal out.
I1~I8 INPUT There are 8 input signals (External device
→
StellarMark)
available to communicate with external devices
STOP INPUT When Stop- pin and Ground pin are at short status, laser
marker will stop working.
START INPUT When Start- pin and Ground pin are at short status, laser
marker will trigger the fire.
E-Stop INPUT This is terminal used to connect external emergency
stop.
GND POWER Ground
24V POWER
(Output)
A 24V is available