GCC Technologies LaserPro StellarMark IFII Series, User Manual

Page: 99 / 111

StellarMark IFII-Series User Manual
Rev.5.0
95
`
9.1 I/O Pin Assignment
The I/O terminal located on the rear side of Control Unit allows IFII- series laser
marker to communicate with external devices, such as conveyor, XY moving table,
rotary index table, and more.
I/O TYPE DESRIPTION
O1~O8 OUTPUT There are 8 output signals (Stellar Mark
→
External
device) available to communicate with external devices.
Alarm
(Out)
OUTPUT
➢
When Alarm is inactivated, the laser marker will
send signal out.
➢
When Alarm is activated, the laser marker will send
out a signal out .
➢
When marking software is opened, the Alarm will be
activated and laser marker will send a signal out in
the beginning of work. Until the “Execute” button
is pressed and the “Marking” window jumps out on
marking software, then alarm will change to
“inactivated” (laser marker will send a
signal out).