GCC Technologies LaserPro StellarMark IFII Series, User Manual

Page: 106 / 111

StellarMark IFII-Series User Manual
Rev.5.0
102
`
Keeping your StellarMark IFII-series clean and well maintained will ensure quality
output, consistent reliability, and extended product life. Smoke, dust or residue
build-up inside the laser system or the mechanical components can cause a
reduction in the laser power, reduced product life cycle, and other potential
problems which can be prevented in advance.
This section will cover how to perform regular maintenance for the scan lean of
IFII-series.
The frequency of the cleaning schedule will depend on number of variables such
as the types of material you work with, the work environment, the frequency of
usage, the quality of the exhaust system, etc.
10.1 Regular Spot Check
Before each usage, inspect the machine, the power and connector cables,
and the working environment. Look for frays in cables, proper connections,
and any abnormalities that could have an effect on marking performance
and/or user safety. Be sure that the IFII- series is properly secured and
mounted.
If a problem ever arises with the G-Mark software or the StellarMark laser
marker, be sure to notify GCC local representative as soon as possible.
WARNING
⚫
Always turn off and unplug the laser marker before cleaning!
⚫
Electrical shock may occur if you do not turn off and unplug the marking
system before cleaning.
⚫
Damage may occur to the system if you do not turn off and unplug the
IFII-series before cleaning.