GCC Technologies LaserPro StellarMark IFII Series, User Manual

Page: 89 / 111

StellarMark IFII-Series User Manual
Rev.5.0
85
`
7.2 Lens Parameter Card
Before you start to operate the laser marker, the output scale of laser marker
and the G-Mark marking software must be adjusted to match each other.
Otherwise, the marking lines will be distorted or will have an improper scale of
the marking content.
Step 1. Take out the lens parameter card from the accessory kit
Step 2. Open G-Mark marking software
Step 3. C
lick on work area from property table and press “Lens Manager…”