GCC Technologies LaserPro StellarMark IFII Series, User Manual

Page: 7 / 111

StellarMark IFII-Series User Manual
Rev.5.0
3
`
1.3 The Safety Interlock System
StellarMark IFII- series can optionally integrate with StellarMark safety shield
which equipped with a safety interlock system utilizing limit switch sensors.
The limit switch sensor will shut the laser off when detecting front door open,
and provides users of IFII- series laser marking system further safety
protection. Do not attempt to remove or modify the limit switches or any other
component of the safety interlock system. If any time, the safety shield door is
open while the laser keeps firing, unplug the system IMMEDIATELY, and
contact GCC local representative for technical support and maintenance
instructions.
1.4 Safety Labels
According to CDRH standards, all fixed or removable covers that allow access
to laser beam must have appropriate laser warning labels attached to them.
These warning labels must be clearly visible to the operator prior to removing the
cover. Additional labels must be applied to the interior of the machine and visible
to operators when covers are removed.
A label clearly displaying the manufacturer’s name, date of manufacture,
description of product, model number, serial number, and compliance statement
must be attached to the outer surface of the machine.
In compliance with CDRH standards, the required warning labels are affixed at
the time of manufacture to the StellarMark IFII-series, attached on appropriate
locations. These labels are not to be modified in any way or removed for any
WARNING
⚫
DO NOT operate the laser system if any component of the safety system is
malfunctioning.
⚫
DO NOT attempt to remove or modify any component of the safety interlock
system.