GCC Technologies J5 Series, Maintenance Manual

Page: 42 / 59

Version : 9.0
42
4.1.10 Adjusting the Y Motor Tension Belt
1. Loosen the 3 retaining
screws locking the
tension bracket in
place but do not
remove them.
2. Place the push-pull tension gauge’s hook-arm at the
hole of Y motor bracket and pull the motor toward yourself
along the direction parallel to the line that passes through the
motor shaft and the drive pulley shaft.
3. Once the desired tension
is found tighten the 3
retaining screws to lock
the tension bracket in
place.