manualshive.com logo in svg

GCC Technologies 21 Series, User Manual

Share
Download
GCC Technologies 21 Series User Manual Download Page 59

2-9

7.

The “Untitled 1” dialog box returns again.
The icon in the “PostScript Printer
Description (PPD) File” box now shows
your printer.

Click Create to create the new desktop
printer.

8.

A Save dialog box opens, asking you to
save the desktop printer. Type in a name
for the desktop printer, or leave the default
name. Click Save.

A new Desktop Printer icon will appear on
the desktop with the name that you
assigned.

9.

Go to File and Quit to exit the Desktop
Printer Utility. The printer is selected and
ready to print.

The GCC Product Registration utility will
run after the printer is setup. Please follow
the registration instructions to register your
printer.

Summary of Contents for 21 Series




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands