mini 200
Starter Kit
36
All HomePlugAV devices are loaded using a default logical network (network name), which is
normally “HomePlugAV”. In the Privacy screen, you can modify a private network by changing
the network names and the passwords of the devices.
You can always reset to the HomePlugAV network (Public) by entering “HomePlugAV” as the
network name or by clicking on the Use Default button.
Note:
If the network name changes to anything other than HomePlugAV, the network type in the
main screen is displayed as Private.
Set Local Device Only
This button is used to change the network name and password of the local device. If a new
network password is entered, all the devices appeared in the main panel prior to this are no
longer present in the new network, effectively making the local devices not to communicate to the
devices which are in the old logical network. Click Set Local Device Only, the devices previously
set up with the same logical network (same network name) appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear in the main panel. If
these devices whose passwords have been entered for the same logical network, a dialog box ap-
pears, indicating the success of this operation. For the devices whose passwords are not entered,
this operation will fail and it will report a failure message.
