mini 200
Starter Kit
26
1.3 System Requirements
Only for the Utility software.
- Operating system: Windows 98SE, 2000, ME, XP 32/64 bit and Vista 32/64bit - 7
- CPU: Intel Pentium III or better, clock rate faster than 2.0GHz recommended
- RAM: At least 128MB
- Screen resolution: Any resolution
- Free disk space: At least 20MB
- Network interface: At least one Fast Ethernet (100 Mbps) network card, and a Ethernet Cord
1.4 Packing List
- 2 Mini200
- 1 CD ROM
- 2 RJ45 Ethernet cables
- 1 Quick Guide
2 Safety Precautions
This device is intended for connection to the AC powerline. For installation instructions, please
refer to the installation section of this guide. The following precautions should be taken when
using this product.
1 Read all instructions before installing and operating this product.
2 Follow all warnings and instructions marked on the product.
3 Unplug the device from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not
use liquid cleaners or aerosol cleaners.
4 Do not operate this product near water.
5 This product should never be placed near or over a radiator or heat register.
6 Do not use an extension cord between the device and the AC power source.
7 Only a qualified technician should service this product. Opening or removing covers may result
in exposure to dangerous voltage points or other risks.
8 Do not plug the device into a power strip or surge protector because these devices may consist
of filter and impair signal.
9 Avoid plugging the device right next to noisy sources such as cell phone charger, Halogen light,
noisy desktop computer, vacuum cleaner, etc. These cases result in poor transmission speed.
10 Unplug the device from the wall outlet and refer the product to qualified service personnel for
the following conditions:
-If liquid has been spilled into the product
-If the product has been exposed to rain or water
-If the product does not operate normally when the operating instructions are followed
-If the product exhibits a distinct change in performance
