mini 200
Starter Kit
33
The lower panel displays all the HomePlugAV remote devices, which are discovered in the current
logical network. The total number of remote devices connected in the same network is displayed
above the remote device panel. Network type (Public or Private) depends on the network status of
the local device. Autoscan shows whether the autoscan function is on. The following information
is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To change the name, click
Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it. The steps for setting
the password of the device (required when creating a private network) are as follows:
Step 1
Click the device name to select the device in the lower panel.
Step 2
Click Enter Password. A dialog box appears, showing the device name and password.
