HiToP 1touch
35
gbo Medizintechnik
AG
Version 1.2
11
Troubleshouting
Each problem that occurs during operation of the unit will be shown in a message
window on top of the display and will be accompanied by an acoustic tone. Most of
the problems can be solved by the instructions displayed.
In general:
1.
The malfunction is shown on the display.
2.
An acoustic signal is heard.
3.
Follow the instructions on the display.
Suggestions:
Turn off the unit and turn it on again.
If the error occurs again, the device is not functioning. Please contact a service
authorized by the manufacturer.
Further errors
symptom
cause and action
The device cannot be switched on,
no display is shown.
Please check the mains plugs and sockets.
If necessary contact your service agent or
the manufacturer.
No acoustic signal is heard.
(End of therapy…)
Please check the settings of the acoustic
sound in the menu. The volume must be
greater than 0.
Please contact your service agent or the manufacturer if the problems cannot be
solved by the measures mentioned above.
Please note that the unit must be placed on a plane horizontal surface. The device
should neither be placed in front of radiators nor should it be covered with pillows or
blankets while in operation. Do not cover the ventilation slots on the bottom of the
unit either.
