MAINTENANCE
For best performance it is recommended that you oil the cutting blades whenever a decrease in shred
capacity is noticed. Follow the steps below to oil your cutting blades:
1. Pour a steady stream of lubricant across scrap sheets of paper.
2. Turn the shredder on and shred the lubricated sheet.
3. When shredding is complete, reverse the shredder to help distribute the lubricant across the
cutting blades.
WARNING
recommends only the Shredmaster lubricant which is a non-flammable, non-aeosal, and
biodegradable formula. The use of other lubricants, aeosals,or pump sprays, may be a fire or combus-
tion hazard due to the solvent content, atomization, or the propellant.
ACCESSORIES
Shred Bags
Please refer to the label on the inside of the front door of your shredder cabinet for
the part number for the proper bag for your unit.
Shredder Oil
Order Part Number 1760049
To order contact your dealer or call GBC National Service at 1–800–790–7787.
TROUBLE SHOOTING
If your machine does not function please check the following:
SYMPTOM
CORRECTIVE ACTION
Unit will not run
Plug unit in.
Switch Unit to ON "I" position.
Close cabinet door.
BIN FULL light “ ” will not turn off
Empty shred bin.
Check shredder and cabinet interface, see “Set Up”.
OVERLOAD Light “ R” will not turn off
Clear overload.
After opening the cabinet door, switch unit to the "OFF" position
and then back to the "ON" position.
Decrease in sheet capacity
Lubricate cutting blades per “Maintenance” section of this Manual.
If none of the above actions correct the problem contact your local dealer or call GBC National Service at
1-800-790-7787.
SPECIFICATIONS
Model:
3220S
3260X
3270M
4220S
4260X
5020S
5220S
5260X
5270M
Throat Width
10 1/4"
10 1/4"
10 1/4"
12"
12"
15"
15"
15"
15"
Shred Size
1/4"
3/16" x 1 1/2" 3/32" x 19/32"
1/4"
3/16" x 1 1/2"
1/4"
1/4"
3/16" x 1 1/2" 3/32"x19/32"
Sheet Capacity
18–20
12–14
8-10
20–22
14–16
12– 14
20–22
15–17
10–11
Speed 25
25
25
30
30
30
40
35
35
Duty Cycle
Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous Continuous
Shredder Head Wt. 26.0 lbs.
27.0 lbs.
37.0 lbs.
53.0 lbs.
53.0 lbs.
57.0 lbs.
59.5 lbs.
58.0 lbs.
58.0 lbs.
Total Unit Weight
52.0 lbs.
53.0 lbs.
63.0 lbs.
89.0 lbs.
89.0 lbs.
99.5 lbs.
99.0 lbs.
97.5 lbs.
97.5 lbs.
Amperage
5.6 A
5.6 A
5.6 A
8.0 A
8.0 A
4.6 A
8.0 A
8.0 A
8.0 A
Volts/Hz
115V/60Hz 115V/60Hz 115 V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz 115V/60Hz
0
4
!
Summary of Contents for Shredmaster 3220S
Page 1: ...13 ...
Page 11: ...0 04 03 ...
