![background image](http://html1.mh-extra.com/html/gbc/pro-tech-ds-60/pro-tech-ds-60_operation-and-maintenance-manual_571033007.webp)
DS-60 Operation and Maintenance Manual
© GBC Pro-Tech 1998 January
1-3
WARNING
CAUTION
CAUTION
CAUTION
WARNING
CAUTION
WARNING
WARNING
WARNING
Exercise care when cleaning the rolls with 80%
isopropyl alcohol:
•
Use only in a well ventilated area.
•
Wear rubber gloves.
•
Use only on cool rolls.
Cleaning heated rolls can ignite the fumes.
Use only 80% isopropyl alcohol or a rubber
cement eraser to clean the main rolls. Harsh
chemicals like toluene, acetone or MEK destroy
the silicone covering of the rolls.
Raise the upper main roll when the heat press is
not in operation. Prolonged contact can damage
the rolls.
Excess pressure can damage the main rolls.
Always select the minimum roll pressure
necessary to complete the task.
The operating environment must be free of dust,
flammable liquids and vapors. You can be
injured by inhaling chemical vapors. Vapor build
up or stored flammable liquids can cause a fire.
Excessive dust can damage the heat press.
Do not use a knife or other sharp instrument
during installation or while servicing the heat
press. You can cause irreparable damage to the
rolls.
Do not operate the heat press if the power cord is
damaged or frayed. You can be severely shocked,
electrocuted or cause a fire. Contact a qualified
electrician to replace the cord.
Do not attempt to move the heat press across
anything other than a flat, level surface without
trained and qualified riggers. You can be crushed
or seriously injured.
The DS-60 Heat Press is a large and heavy piece
of equipment. It is necessary to employ
LICENSED RIGGERS ONLY to move the
machine. The heat press is not designed to be
tipped up or sideways in any way. Such action
disturbs the exact alignment of the rolling parts
of the machine and requires extensive
realignment. GBC Pro-Tech’s warranty does not
cover malfunction of the equipment due to
mishandling and/or tipping.
GBC Pro-Tech bears no responsibility for
personal injury or damage due to moving the
heat press improperly.
Do not allow anything to rest on the power cord.
Do not locate the cord where people can walk on
it. You or others can be severely shocked,
electrocuted or cause a fire.
Summary of Contents for PRO-TECH DS-60
Page 4: ...DS 60 Operation and Maintenance Manual iv GBC Pro Tech 1998 January Blank page ...
Page 16: ...Installation DS 60 Operation and Maintenance Manual 2 6 GBC Pro Tech 1998 January Blank page ...
Page 32: ...Warranty DS 60 Operation and Maintenance Manual 5 2 GBC Pro Tech 1998 January Blank page ...
Page 36: ...Index DS 60 Operation and Maintenance Manual 7 2 GBC Pro Tech 1998 January Blank page ...