![background image](http://html1.mh-extra.com/html/gbc/fusionpunch-ii/fusionpunch-ii_user-manual_571156068.webp)
2-26
General Procedures
Using the GBC Stacker
The GBC Stacker is inline with the FusionPunch II and interfaces
electronically and mechanically with the FusionPunch II. The Stacker will
start up and shut down automatically with the Punch, under control of the
Printer.
The Stacker requires minimal operator intervention, with the exception of
unloading the Stacker Tray. Although the internal Stacker Tray has an
extension that is adjustable, you will seldom have to change this adjustment,
except in the case of job runs with unique paper sizes. See Figure 2- 26
below for locations of Stacker components.
Figure 2-26: The GBC Stacker with Front Door open
Stacker Tray
Stacker Door
Summary of Contents for FusionPunch II
