GBC FusionPunch II, User Manual

Page: 30 / 132

1-18 Getting Started
c)
Enter the name and type of the finishing device, for example,
Punch
for name and
External
for type .
d)
Verify that all of the entered values conform to those in the profile
sheet. If they do not, enter the values from the profile sheet.
Note: Do not click OK at this point. Go on to Step 6.
6
Click on the
Timings
tab in the Device Profile Window.
The Device Profile Window will display the
Timings
screen, as shown
in Figure 1-9.
Figure 1-9: The Timings screen