![background image](http://html1.mh-extra.com/html/gbc/620os/620os_installation-and-operating-manual_3876058007.webp)
GBC 620os
Operation Manual
© 2007 General Binding Corporation
Page 7
NTROL GUIDE
FRONT CO
Figure 1
play the settings the machine is
s for the top heater, speed, Burst,
t.
es not stand for Feet/Minute.
eet/Minute.
eat roll for the purpose of
ing the film.
reverses the rollers
rection to clear film jams.
tate. The rollers will also rise to
position.
e will activate the
for normal operation.
the
MASTER DIAL
to
ting Rollers
to
he control panel
ange is 32°F-302°F.
or and
returning the count to “0”.
eric value
for the selected setting when turned.
for sheet separation,
URST ON/OFF
.
. When
n, turns off the cooling fan.
t.
This is a pre-set speed and can not be changed.
A. LCD Display:
•
The
LCD
will dis
currently set for.
•
Illuminates when the laminator is plugged in and
POWER ON/OFF
is in the on, (I), position.
Displays setting
and ready/wai
B. MOTOR SPEED:
•
When pressed, permits increasing or decreasing
of speed by turning the
MOTOR SPEED
and is
indicated on the control panel display. Range is
1-15. The number do
15=40F
C. LOADING:
•
When pressed, permits the operator to run
product into the h
thread
D.REVERSE:
When pressed, and held,
•
di
E. STOP:
•
When pressed, the machine will stop and the
rollers will not ro
the up
F. RUN:
pressed, the machin
•
When
rollers
G. LENGTH:
•
You can enter your paper length by pressing
LENGTH
then turning
the desired paper size.
H. BURST:
•
You can determine where and when you want to
activate the
Burst Rollers
by pressing
BURST
and changing the value displayed on the
LCD
by
rotating the
MASTER DIAL
. Values displayed
range from 580-660. A decal is located between
he
Main Rollers
and the
Burs
t
determine what value is desired.
I. HEAT:
•
When pressed, permits increasing or decreasing
of the temperature by turning the
MASTER
DIAL
and is indicated on t
display. R
J. Reset Button:
•
On the
LCD
, the sheet count will appear
indicating how many sheets were run through the
machine. By pressing
RESET
, the operat
clear this value
K. MASTER DIAL:
•
Increases (+) or decreases (-) the num
L. BURST ON/OFF:
e the Burst Roller
•
To activat
press the
B
M. FAN ON/OFF:
•
When pressed, turns on the cooling fan
pressed agai
N. BURST SPEED:
•
When
BURST SPEED
pressed, the RPM’s of
the Burst Rollers will increase helping to Burst or
Snap stronger films such as Digital Lay Fla
Fig
ure 1