GBC 620os
Operation Manual
© 2007 General Binding Corporation
Page 13
FEATURES/ACCESORIES GUIDE
Figure 15
Figure 16
Figure 17
BURSTING ROLLERS
(
Fig. 14– Item N1)
When the
Bursting Rollers
are activated, images are
separated. There are 2 speeds to select from on the
Main
Control Panel.
STACKER TRAY LATCHES
(
Fig. 14– Item O1)
The
Stacker Tray Latches
secures the
Stacker Tray
to
the laminator.
FILM TENSION KNOB
(
Fig. 15– Item P1)
The
Film Tension Knob
allows the operator to adjust the
amount of film tension.
FILM SLITTER REWINDER TENSION KNOB
(
Fig. 15– Item Q1)
The
Film
Slitter Rewinder Tension Knob
allows the
operator to adjust the amount of tension to the
Rewinder.
MEDIA TABLE
(
Fig. 16– Item R1)
The
Media Table
provides a working space for the
operator. The
Media Table
is used to store media being
used during operation of the laminator.
MEDIA TABLE HANDLE
(
Fig. 16– Item S1)
The
Media Table Handle
allows the operator to pull the
Media Table
out for use and return to original location.
COMPRESSOR OUTPUT HOSE
(
Fig. 17– Item T1)
The
Compressor Output Hose
supplies the laminator with
the necessary PSI to run the laminator.
COMPRESSOR PLUG
(
Fig. 17– Item U1)
The
Compressor Plug
plugs into an independent power
source. The Compressor needs 220VAC.
See Specs for
details on plug configuration.
COMPRESSOR AIR REGULATOR
(
Fig. 17– Item V1)
The
Compressor Air Regulator
allows the operator to
adjust the amount of PSI used.
COMPRESSOR ON/OFF
(
Fig. 17– Item W1)
The
Compressor On/Off
allows the operator to turn the
Compressor On and off.