ProCut 17P – Installation and Operating Instructions
Page 1-2
W
arnInGs
(
cont
’
d
)
• Consider the work area. A cluttered work area
can lead to accidents. The machine must be
placed on a sturdy level floor surface. Allow
sufficient access to the front, back, and sides.
Keep the work area well lit.
•
Plastic bags must be kept out of reach of
children.
Failure to observe these warnings could result in
severe personal injury or death.
c
autIons
Caution indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury or
cause damage to the machine.
G
eneral
•
Keep fingers, hands clothing, jewelry, and long
hair away from the front of the Working Table,
Clamp, and Cutting Blade.
•
Use only sufficiently stable and compatible
stands. Make certain the equipment is installed
securely and cannot fall down.
•
Do not use the machine for other than its
intended purpose.
•
Avoid quick stops, excessive force and uneven
floor surfaces when moving the machine.
• The cutter and stand are separate components.
The cutter and stand will need to be lifted and
moved separately.
•
Do not defeat or remove electrical and
mechanical safety equipment such as interlocks,
shields and guards.
•
Do not insert objects unsuitable for the purpose
of this machine or expose the equipment to
liquids.
• The cabinet should remain locked at all times
and only be opened by approved personnel.
•
Do not store flammable items in the cabinet.
Before you operate this machine, it is important that
you read and understand the entire contents of these
instructions.
e
lectrIcal
The machine should be connected only to a source
of power as indicated in these instructions and on the
nomenclature plate located on the side of the machine.
Contact an electrician should the attachment plug
provided not match the receptacles at your location.
After plugging in, check that the power cord does not
create a tripping hazard.
WARNING:
Do not attempt to service or repair.
Failure to observe this warning could result severe
personal injury or death.
Disconnect the plug from the receptacle and contact
your dealer or distributor, or GBC Technical Service at
1-800-723-4000, when one or more of the following has
occurred.
• The power supply cord or attachment plug is
damaged.
• Liquid has been spilled into the machine.
•
The machine is malfunctioning.
• The machine does not operate as described in
these instructions.
Opening the machine exposes you to hazardous
voltage, which can seriously hurt or kill you.
There are no user serviceable parts inside. Refer
service to qualified service technician.
CAUTION:
The receptacle must be located near the
equipment and must be easily accessible.
Disconnect the attachment plug from the receptacle to
which it is connected and keep the power supply cord in
your possession when moving.
GBc t
echnIcal
s
ervIce
To order replacement accessories, service, parts, or
an Equipment Maintenance Agreement, please contact
GBC Technical Service and Support at:
u
nIted
s
tates
ACCO Brands
GBC Technical Service and Support
4 Corporate Drive
Lake Zurich, IL 60047-8997
www.gbcconnect.com
1-800-723-4000
c
anada
Ontario and Quebec – 1-800-268-3310
All other Provinces – 1-800-268-3447
Local 905-595-3100
M
exIco
(55) 1500 5778
Lada SIN costo: 01 800 759 6825
