![background image](http://html1.mh-extra.com/html/gbc/1711718/1711718_instruction-manual_570888008.webp)
GBC 5031TS
OPERATION MANUAL
© 2006 General Binding Corporation
7
FEEDER CONTROLS
(Contd.)
A. Rear Guides:
Reversible for longer sheets.
B. Side Guides:
These are adjusted to keep the sheets from
floating. They should be snug to the sheets, but
not too tight or they will prevent the sheets from
feeding properly.
Warning:
Do not stack anything on the
Feed Table other than the sheets
intended to be laminated. Make sure the
sheets are directly under the Pile Height
box before turning on the laminator.
SWING-OUT FEEDER
A. Left Feeder Latch
(Figure 9)
Both latches MUST be disengaged before
swinging out the feeder.
A. Right Feeder Latch
(Figure 10)
A
B
Figure 8
Figure 9
A
Figure 10
A
Swing out feeder to load bottom film roll.