![background image](http://html1.mh-extra.com/html/gbc/1711718/1711718_instruction-manual_570888028.webp)
GBC 5031TS
OPERATION MANUAL
© 2006 General Binding Corporation
27
CUTTER
PROBLEM
CAUSE
SOLUTION
Will not turn on
No Power
Check the power cord at the wall
Motor(s) not turning
Safety Shield not latched
Check the Safety Shield latches
Blown fuse(s)
Replace fuse(s)
Rear cut is angled
Output roller guides not lined up
properly
Adjust the Output Roller Guides
Not cutting
Sheet sensor not working
Have a qualified technician check
the unit
Finished margins don’t match
settings
In-feed Rollers are dirty
Clean in-feed rollers
Calibration is off
Have a qualified technician check
the unit.