background image

5

GAR_TL_055_0316_PM3100

7.  Before use, verify the instrument's operation by measuring a known voltage. 
8.  Make sure all relevant ground connections are good and secure. 
9.   Do not position the instrument so that it is difficult to operate the disconnecting device. 
10.  Never attempt to repair or service the instrument. 
11.  To clean the instrument, use dry soft cloth. Do not use abrasives or solvents. 
12.   If the instrument is used in a manner not specified in this Instruction Sheet, the protection provided  

by the instrument may be impaired. 

13.  Do not use the instrument if label is damaged or part of label upwarps. 
14.   CAT II - Measurement Category II is for measurements performed on circuits directly connected to low voltage 

installation. (Examples are measurements on household appliances, portable toots and similar equipments.)  

Do not use the instrument for measurements within Measurement Categories Ill and IV. 

800.822.9220

Milwaukee, WI 53209

gardnerbender.com

CARE & STORAGE: Unit should be kept clean at all times. Clean using only a soft cloth or cotton swab with medical alcohol. Do not submerge 
any part of the Power Meter. The Power Meter should be stored at room temperature. 

WARRANTY: Gardner Bender warrants its product against defects in workmanship and materials for 1 year from date of delivery to user. Chain 
is not warranted. Warranty does not cover ordinary wear and tear, abuse, misuse, overloading, altered products or use of improper fluid.

WARRANTY RETURN PROCEDURE: When question of warranty claim arises, send the unit to the nearest Gardner Bender Authorized Service 
Center for inspection, transportation prepaid. Furnish evidence of purchase date. If the claim comes under the terms of our warranty the 
Authorized Service Center will REPAIR OR REPLACE PARTS AFFECTED and return the unit prepaid.

* Note: 

•  The warranty is not applicable if the instrument has been: misused, abused, subjected to loads in 

excess  of specifications, has had unauthorized repair or has been improperly assembled or used.

•  Gardner Bender is not liable or responsible for any loss. 

Summary of Contents for PM3100






Reviews: