3
IV. SWITCHING AMONG DIFFERENT MODES
Pressing MODE switches the Cost/Price area and kWh/Time area among different modes in a circulation pattern.
The following Illustrations show the process. Pay attention to the symbols and units on the two areas.
V. SETTING T1 , T2 AND THE PRICES
Setting the start time and terminal time of Tl
1. Press
MODE until the start time or terminal time of Tl is displayed on the screen.
2. Press
PRG to enter setting mode.
3. Press
PRG to select the desired item you want to adjust. The selected item will blink.
4. Press
MODE to adjust the selected item.
5. When all adjustments have been completed, select the last item (the rightest item) by pressing
PRG.
6. Press
PRG once more to finish the setting.
Setting price T1/kWh and price T2/kWh
1. Press
MODE until the total energy cost of T1 (for setting price T1 per kWh only) or the total
energy cost of T2 (for setting price T2 per kWh only) is displayed on the screen.
2. Perform steps 2 through 6 of the
Setting the start time and tenninal time of Tl section.
Note:
Price T1 /kWh is the energy price of T1, price T2/kWh is the energy price ofT2.
