15
ENG
Viewing records
Settings menu in the photo shooting mode
Capture Mode
Resolution
Sequence
Quality
Sharpness
White Balance
Color
ISO
Face Detection
Anti-Shaking
Quick Review
Date Stamp
Use the
MODE
button to switch to the photo shooting mode and
take a snapshot by pressing the
REC/SNAP
button. Use the
MODE
button to exit from the viewing menu.
Vacuum mount installation
Disengaging the frame
from the mount
Press on
the tab
Disconnect
the recorder
from the moun
You can rotate the recorder
in any direction around its axis.
To remove the MVR from
the mount, follow the steps
shown in the drawing.
Connect the frame of the device
with the mount.
Install the MVR and fix
the power supply cable as shown
in the drawing.
Until click
1
3
4
360 ° rotation
2
Recommendation:
Install your MVR as high as possible (MVR
frame right next to the rear view mirror or behind it) in the
position in which the lens is titled slightly downward at an angle
of about 15°. If the MVR is mounted too low (on the dashboard
or a bit higher), the recorded videos will not provide full informa-
tion about the road situation because it is impossible to see the
front of your vehicle, therefore there is no «reference point».
Recordings will be significantly dimmed if the device is mounted
in parallel with the road or at an upward angle.
