ENG
10
Preparing MVR
18:54:12
2012/01/08
EV +0
Loop
recording
Recording time
00:24:19
1080Р
Memory card
is inserted
Battery charge
indicator
Recording quality
Mode
Exposure
Date and time captions
(shown in the video)
Recording
mode indicator
One must adjust the MVR settings before using the device. The main
settings are optimal by default (factory settings) but in any case,
you must set the exact time and date. This is necessary for correct
functioning in the recording mode and further analysis of recorded
video sequences.
1. Do not connect the MVR to the power supply yet. First make sure
that all the indicators are off and then insert the memory card.
The memory card is inserted with connectors towards the
display.
2. Connect the recorders’ power unit to the car’s cigarette lighter
socket and supply the power.
When you turn on the MVR, it
automatically switches to the recording mode. That is why you
will see the real time camera image at once (loop-through
channel) and the recording mode indicator will light up.
3. Press the
REC/SNAP
button to stop the recording first, if you
want to go to the setup menu (the recording mode will take some
time to shut down as it is closing and saving the current file) and
then press the
MENU
button.
4. Use
UP
and
DOWN
buttons to navigate through the menu,
REC/SNAP
to go to the submenu, and
MENU
button to go back.
Preparing MVR
Main window icons definition
Settings menu
Following icons can be found in the settings menu.
18:54:12
2012/01/08
EV +0
Loop
recording
Recording time
00:24:19
1080Р
Memory card
is inserted
Battery charge
indicator
Recording quality
Motion
detection
Mode
Exposure
Date and time captions
(shown in the video)
1/4
Date Stamp
Resolution
2/4
3/4
Lamp setting
4/4
Video settings
Video settings
Settings
Settings
Loop recording
Motion Detection
Record Audio
Format
Default Setting
Software version
Date/Time
Beep Sound
Language
Frequency