11
ENG
Preparing MVR
One needs to preconfigure the MVR before using it. By default
(factory settings), all main parameters are set to optimal values.
Nonetheless, one still needs to set the exact time and date. This is
required for further analysis of recorded video files.
1.
Make sure that all indicators are turned off and then insert the
memory card into the corresponding slot without connecting the
МVR to a power source.
The memory card must be inserted with
contacts facing the screen.
2.
Connect the MVR power adapter to a 12V car cigarette lighter
socket and supply power.
Once turned on, the MVR automatically
switches to the recording mode. Therefore, the first thing you will
see on the screen will be real-time video feed from the camera
(point-to-point channel) and the recording mode indicator.
Main window icons definition
3.
To access the МVR settings menu, you first need to stop the
recording by pressing the
OK
button (15) (the recording stops
with some delay because the device needs to close and save the
file with the last video clip) and then press the
MENU
button (5).
4.
Use «
Up
» (3) and «
Down
» (8) buttons to navigate the menu,
OK
button (15) – to access submenus and select parameters,
MENU
button (5) – to exit from the menu.
GPS status
(for Gazer F150g)
WDR
Cycle Recording
Power/Battery
Indicator
Recording resolution
Recording Mode
(Video/Time-Lapse/Photo)
Date and Time
Current recording
location
(for Gazer F150)