16
ENG
5.
After adjusting the camera view, go back to the previous menu using the “Back” button on the remote control. Enter L (Length), W
(Width), P (Pan) values in the corresponding
fi
elds in accordance with your data and then select “
А
uto” (Fig. 9) in the menu. In case
calibration was successful, you will see a panoramic “plan” view of your car without any blind spots (Fig. 9).
Fig. 9
Note:
In case of incorrect calibration, repeat the procedure.
Recommendation:
Cameras must be mounted at least 40 cm above the ground. Follow this recommendation at all times to avoid
system malfunction.
Setting up procedures
