14
ENG
Caution!
The distance from the front sheet to side sheets (P1, P2) as well as distances S1 and S2, O1, and O2 must be the same
(P1=P2; S1=S2; O1=O2).
System calibration
To ensure that information from each camera is displayed correctly and the feed from all cameras is merged into a single “plan view”, one
needs to calibrate the device before use. This requires: tape measure - 5 m (2 pcs) and 7.5 m (2 pcs); 1.6 m x 1.2 m calibration sheet (4 pcs).
To calibrate the system, follow the steps below:
1.
Place calibration sheets in front of each camera as shown in the diagram below (Fig. 4). Red marks on the front and rear calibration
sheets must be aligned with the car’s central axis. Red marks on side calibration sheets must be aligned with the car’s wing mirrors
(mounting seats inside the mirrors).
2.
Measure distances L, W, P1,and P2 (Fig. 4)
Fig. 4
P1
P2
S1
S1=S2
P1=P2
O1=O2
S2
O1
O2
Setting up procedures
