12
ENG
Central control unit mounting
Once the cameras are mounted, connect them to the central control unit observing the color of connection wires (Fig. 3).
Mount the central control unit in the front of the vehicle (under the steering column or under the driver’s seat). For correct operation of the
G-sensor function,
fi
x the central control unit tightly on the car body or any other stationary part of the car interior. Make sure you put the
USB cable in an easy-to-reach place. This way you will not have any trouble connecting a USB drive and copying video
fi
les.
Blue cable for
monitor control
Black
Yellow
Red
Pink
Orange
Green
GND
BAT+
ACC+
Left turn signal
Right turn signal
Reverse gear signal
4
5
6
7
8
2
3
1
9
1. Blue cable for monitor
control:
switch-over to view a
surr
о
und video review (+12V).
2. USB port:
USB drive
connection for copying video
fi
les and updating
fi
rmware.
3. Black 3.5 mm jack:
remote
control receiver connection.
4. Yellow AV jack:
monitor
connection.
5. Black 4-contact jack:
front
view camera connection.
6. Yellow 4-contact jack:
left
side view camera connection.
7. White 4-contact jack:
right
side view camera connection.
8. Red 4-contact jack:
rear
view camera connection.
9. Power and control socket.
Fig. 3
Installation
