Gazelle Innergy Series, User Manual

Page: 65 / 127

The battery
65
7
6
5
8
Placement and removal of the battery
Placement:
• Make sure that the bike sits firmly on the kickstand.
• Hold the battery with two hands, direct the front of the
battery in a way so that the recesses on the sides of the
battery line up with the battery guides on the luggage
carrier. (Photo 4)
• Ensure that the bike key is in the battery lock. Rotate it a
quarter turn clockwise while pushing the battery with your
free hand in a forward direction until it can’t go any further.
Beware: the bike key must always be in the battery lock or
else you can’t completely push in the battery. (Photo 5)
• Take the key out of the battery lock, put it back into the bike
lock and unlock the bike. (Photos 6 + 7)
• Check if the battery is properly fixed by lightly pulling on
the battery. (Photo 8)
• If this is not the case, you must repeat the 3 previous steps.
If the battery has been slid in correctly, the display will be
activated as well.