Gazelle GC2030, User Manual, Page: 5 / 16

5
EN
amounts of water and seek medical advice.
g)Do not use any charger other than that specifically
provided for use with the equipment.
h)Do not use any cell or battery which is not designed
for use with the equipment.
i)Do not mix cells of different manufacture, capacity,
size or type within a device.
j) Always purchase the battery recommended by the
device manufacturer for the equipment.
k)Keep cells and batteries clean and dry.
l)Wipe the cell or battery terminals with a clean dry
cloth if they become dirty.
m)Secondary cells and batteries need to be charged
before use. Always use the correct charger and
refer to the manufacturer’s instructions or equipment
manual for proper charging instructions.
n)Do not leave a battery on prolonged charge when
not in use.
o) After extended periods of storage, it may be
necessary to charge and discharge the cells
or batteries several times to obtain maximum
performance.
p)Retain the original product literature for future
reference.
q)Use the cell or battery only in the application for
which it was intended.
r)When possible, remove the battery from the
equipment when not in use.
s)Keep the cell or battery away from microwaves and
high pressure.
t) Dispose of properly.
Symbol
To reduce the risk of injury, user must
read instruction manual
WARNING
Do not burn
Do not charge a damaged battery pack
Do not dispose of batteries.
Return exhausted batteries to your
local collection or recycling point.
TECHNICAL DATA
Model GC2030
Power Voltage V 20
Max. Chucking Capacity mm 13
Max. Screw Dia. mm 10
No-load Speed
1st gear /min 500
2nd gear /min 2000
Impact Frequency IPM 32000
Max. Drilling Dia.
Steel mm 13
Brick Wall mm 13
Wood mm 45
Torque Setting 24+2
Max. Torque N·m
120
Diameter of Drive Spindle Thread 1/2-20UNF
Net Weight
（
Without batteries) kg 1.6
※ Due to the continuing program of research and development, the specifications herein are subject to change
without prior notice.