36
In Fig. 9.4 "A" "P" mark position is shown when the brake pads are new.
When mark position corresponds to the position shown in Fig. "B", friction
linings and brake disk thickness should be checked with the wheels removed.
Moreover, brake pad wear indicator is installed in every disk brake to deter
mine friction linings wear. After reaching of any brake pad limiting wear the
indicator lights up on the instrument panel.
9.5. CHECKING BRAKE FLUID LEVEL IN CLUTCH MASTER
CYLINDER TANK
The level of the brake fluid in the clutch master cylinder tank should be
15–20 mm below upper edge of the tank (Fig. 9.5).
Fig. 9.4.
Checking Brake Lining Wear Rate
Fig. 9.5.
Checking Fluid Level in
Clutch Master Cylinder Tank
1 — service cylinder; 2 — tank; 3 — cap;
4 — reservoir
