22
MODEL C-6000-ESP SERIES COMMAND CENTER - INSTRUCTIONS
Spanish (Español) Instructions:
The C-6000-ESP Command Center has the ability to display
its commands and messages in either English or Spanish
(Español).
Press the
"ENGLISH / ESPAÑOL"
[F3] button to toggle
the language displayed from English to Spanish (Español)
or from Spanish (Español) to English.
NOTE: All messages displayed by pressing the
"MENU"
[F4] button only appear in English. They will not appear in
Spanish (Español).
Using the Menu:
To Enter the Menu, press the
MENU
button [F4].
To navigate the Menu:
• Press [F1] to go to the Next menu item
• Press [F2] to go to the Previous menu item
• Press [F5], the
EXIT
button to exit the Menu
• Press [F6], the
ENTER
button to select a Menu item
1. Cycle Type
• Pressing [F6] [
ENTER
] will prompt for a password. It is
not necessary to change these settings. They are preset
at the factory.
2. Detergent
• Pressing [F6] [
ENTER
] will prompt for a password. It
is
not necessary to change these settings. They are
present
at the factory.
3. Wash Length
• Press [F6] [
ENTER
] to display the Length of Wash #1
• Press [F3] to Increase the Wash Time up to 9 Minutes
(Maximum)
• Press [F4] to Decrease the Wash Time down to 3 Min-
utes (Minimum)
• Press [F1] to adjust the Length of Wash #2 (if applicable)
• Press [F5] [
EXIT
] to return to the menu
• Note: Press [F1] to advance through all washes (ex.)
“-S2” has 2 washes)
4. Delay Time
• Press [F6] [
ENTER
] to display the Delay Time between
washes (Not used if there is only one wash)
• Press [F3] to Increase the Delay Time up to 99 Minutes
(Maximum)
• Press [F4] to Decrease the Delay Time down to 1 Minute
(Minimum)
• Press [F5] [
EXIT
] to return to the menu
5. Set Clock
• Press [F6] [
ENTER
] to display the current Day of the
Week (1=Sunday)
• Press [F3] to change to the next Day of the Week (1=Sun,
2=Mon, 3=Tues, etc.), keep pressing [F3] to cycle around
if necessary
• Press [F1] to go to the current Hour
• Press [F3] to increase the Hour, keep pressing [F3] to
cycle around if necessary
• Press [F1] to go to the current Minute
• Press [F3] to increase the Minute, keep pressing [F3] to
cycle around if necessary
• Press [F5] [
EXIT
] to return to the menu
6. AutoMode [A or M]
• Used to select [M]anual or [A]utomatic mode. If [A] is
displayed, the C-6000-ESP is set to operate in Automatic
mode. If [M] is displayed, the C-6000-ESP is set to
operate in Manual mode.
• Press [F6] [
ENTER
] to display the “Set Mode” screen
• Press [F6] [
ENTER
] again to toggle between [M]anual
or [A]utomatic mode
Setting Which Days of the Week to Run:
• Press [F1] to select which days to run the C-6000-ESP
in Automatic mode
• “Sun ON” or “Sun OFF” will display
• Press [F3] to set a day to “ON”. Set a day to “ON” in
order for the C-6000-ESP to run on that day
• Press [F4] to set a day to “OFF”. Set a day to “OFF” in
order for the C-6000-ESP NOT to run on that day
• Press [F1] to cycle through each day of the week [Sun –
Sat.]
• Press [F5] [
EXIT
] to return to the menu
7. Set WashTimes
• Only used when C-6000-ESP is set to Automatic mode
• Press [F6] [
ENTER
] to display the Start time for the Fan
on Sunday (
Sun. Fan
)
• Press [F3] to increase the Hour
• Press [F4] to increase the Minutes
• Press [F1] to go to the Start time for the Wash on Sun-
day (
Sun.Wash
)
• Set the time, using the same method described above
• Press [F1] to cycle through for each day of the week, for
the Start Times for the Fan and Wash
• Press [F5] [
EXIT
] to return to the menu
8. Wash Test
• Press [F6] [
ENTER
] to run the C-6000-ESP through a
complete Wash cycle with decreased times
• After the Wash Test is complete, the C-6000-ESP will
return to the Fan Off mode
9. Number of Washes
• Pressing [F6] [
ENTER
] will prompt for a password.
It is not necessary to change this value. It is preset at
the Factory.
Summary of Contents for ClearAir RSPC-ESP SERIES
