3
Pro
line
Pro
line
3.3
Compatible products and accessories
Product name
Gavita part number
Compatible controllers
Gavita Master Controller EL1 EU Gen2
HGC990786
Gavita Master Controller EL2 EU Gen2
HGC990786
Gavita Master Controller EL1F EU Gen2
HGC990792
Gavita Master Controller EL2F EU Gen2
HGC990794
Replacement reflector
Gavita HR96 DE
S9021200
Gavita MD 135 DE HC
S7012101
Gavita W 150 DE
S7013101
Compatible lamps
Gavita Pro Plus 1000 W EL DE HPS
LP8011816
Compatible power cord
Wieland RST20i3 0,6 m mains cable
CB6873121
Compatible interconnect cable
Interconnect cable RJ
CB6633621
Repeater bus connection kit
HGC906170
3.4
Environment
The product is intended to be used in greenhouses and climate rooms. The product can be used in damp environments. The
product may not be used in wet environments or outdoors. The lamps function optimally when the ambient temperature is
between 20 ~ 30 °C.
3.5
Legal
CE LVD approval according to: EN 60598-1: 2008 + A11: 2009.
CE EMC approval according to: EN 55015 (2013).
4
Safety recommendations and warnings
6
Warning!
Carefully read the warnings below before using or working with the product!
•
Always adhere to the local rules and regulations when installing or using the luminaire.
•
Do not open or disassemble the luminaire, it contains no servicable parts inside. Opening the luminaire can be
dangerous and will void the warranty.
•
This product may cause interference to radio equipment and should not be installed near maritime safety
communications equipment or other critical navigation or communication equipment operating between 0.45 - 30
MHz.
•
Do not use the luminaire when either its lamp or its power cord are damaged. Replace the power cord only with
original certified cords. Replace the lamp only with lamps specified by Gavita (see paragraph 3.3).
•
The use of other lamps may damage the product and lamp and will void the warranty.
•
Modifications to the cords can lead to unwanted electromagnetic effects, which makes the product not comply with
legal requirements.
•
Do not expose the luminaire to:
− condensing humidity, heavy mist, fog or direct spray;
− (ambient) temperatures outside the specified range;
− dust and contamination;
− direct sunlight during use or HID light that could heat up the ballast.
•
Always disconnect the luminaire from mains before performing any maintenance.
•
Always allow for a cool down period of at least 30 minutes before touching the lamp or reflector. Touching the lamp or
the reflector when the lamp is lit or immediately afterwards will result in severe burns!
•
Never touch the lamp with bare hands as this will cause damage to the lamp.
•
Do not use the luminaire near or above flammable, explosive or reactive substances. The lamp and the reflector of the
luminaire reach temperatures of > 85 °Celsius.
