background image

13

Pro

 line

Pro

 line

11  

Storage and disposal

• 

Store the luminaire in a dry and clean environment, with an ambient temperature of -20 ~ 85 °Celsius.

• 

The product must not be discarded as unsorted municipal waste, but must be collected separately for the purpose of 
treatment, recovery and environmentally sound disposal.

 

1

Caution!

 The lamps are chemical hazardous waste and must be delivered to the designated authorities.

 

1

Caution!

 The lamp contains mercury.

12  

Warranty

Gavita International bv warrants the mechanical and electronic components of their product to be free of defects in 
material and workmanship if used under normal operating conditions for a period of three (3) years from the original date 
of purchase. If the product shows any defects within this period and that defect is not due to user error or improper use 
Gavita International bv shall, at its discretion, either replace or repair the product using suitable new or reconditioned 
products or parts. For HPS lamps the warranty period is one (1) year from the original date of purchase. In case Gavita 
International bv decides to replace the entire product, this limited warranty shall apply to the replacement product for the 
remaining initial warranty period, i.e. three (3) years from the date of purchase of the original product. For service, return 
the luminaire to your shop with the original sales receipt.

Summary of Contents for Pro 1000e

















Reviews: