7
EN
6
SETTINGS MENU
The
Gauss MiL
Settings Menu contains
5 adjustable settings.
Press for the first time and the current
setting and its Target ID value will be displayed
on the screen. Pressing repeatedly calls up
other possible menu settings. If you want to
return to the previous setting, press .
The values of the selected setting can be
adjusted by using . If a setting has
multiple values, then press and hold one of
these buttons to make fast adjustments. To exit
the menu, press .
All the latest settings changes are
saved in non-volatile memory of
the device before it turns off.
FREQUENCY
FREQ
LF1…LF5 is the detector’s operating frequency with the value within the 16 kHz ± 200 Hz
range. The LF group has 5 different frequencies - to tune out noise and mutual interference.
GAIN 1, 2 ... 40
FREQ L1, L2, ... L5
MODE An, iL
Vol 1, 2, ... 10
TRANS OF, c1, c2, c3, c4
GAIN GAIN
This setting value determines the detector sensitivity. It ranges from 1 to 40. The higher the
value, the greater the distance targets can be detected at.
It should be kept
in mind that the detector becomes more sensitive to the effects of
electromagnetic interference and ground signals when entering the limit values of this
setting.