SUSIE
®
S1001 |
User Guide
Equipment Setup
| 11
Plug the charger into the port and let
her charge.
Battery Life
Once the battery is fully charged, the simulator can be
operated
on battery power for up to
6
hours
.
To display the battery level, the UNI® software must first establish
a connection with the simulator. For more information about the
battery indicator, refer to “Working with UNI®” section.
WARNING: Do not store the simulator with a discharged battery. It is
good practice to re-charge the battery at the end of every simulation
session. In addition, re-charged the battery at least once every 2
months even if the simulator is not being used; permanent loss of
capacity might occur because of self-discharge.
3.1 Initializing the Simulator in UNI
The laptop operates the simulator wirelessly.
Follow the steps below to connect to UNI:
1.
Plug in the RF module to the
PC and turn on the computer
