background image

PREMIE™ Blue S108.250  |  

User Manual

30   |  Warranty

8. Warranty

8.1 Exclusive One-Year Limited Warranty

Gaumard warrants that if the accompanying Gaumard product proves to be defective in material or workmanship within one year from the date on 
which the product is shipped from Gaumard to the customer, Gaumard will, at Gaumard’s option, repair or replace the Gaumard product.

  

·

This limited warranty covers all defects in material and workmanship in the Gaumard product, except:

  

Damage resulting from accident, misuse, abuse, neglect, or unintended use of the Gaumard product;

  

Damage resulting from failure to properly maintain the Gaumard product in accordance with Gaumard product instructions, including 

failure to property clean the Gaumard product; and

  

Damage resulting from a repair or attempted repair of the Gaumard product by anyone other than Gaumard or a Gaumard representative.

This one-year limited warranty is the sole and exclusive warranty provided by Gaumard for the accompanying Gaumard product, and Gaumard 
hereby explicitly disclaims the implied warranties of merchantability, satisfactory quality, and itness for a particular purpose. 

 Except for the 

limited obligations speciically set forth in this one-year limited warranty, Gaumard will not be liable for any direct, indirect, special, incidental, 
or consequential damages, whether based on contract, tort, or any other legal theory regardless of whether Gaumard has been advised of the 
possibilities of such damages.  Some jurisdictions do not allow disclaimers of implied warranties or the exclusion or limitation of consequential 
damages, so the above disclaimers and exclusions may not apply and the irst purchaser may have other legal rights.

This limited warranty applies only to the irst purchaser of the product and is not transferable.

  Any subsequent purchasers or users of the product 

acquire the product “as is” and this limited warranty does not apply.

This limited warranty applies only to the products manufactured and produced by Gaumard.

  This limited warranty does not apply to any products 

provided along with the Gaumard product that are manufactured by third parties.  For example, third-party products such as computers (desktop, 
laptop, tablet, or handheld) and monitors (standard or touch-screen) are not covered by this limited warranty.  Gaumard does not provide any 
warranty, express or implied, with respect to any third-party products.  Defects in third-party products are covered exclusively by the warranty, if 
any, provided by the third-party.

  

·

Any waiver or amendment of this warranty must be in writing and signed by an oicer of Gaumard.

  

In the event of a perceived defect in material or workmanship of the Gaumard product, the irst purchaser must:

  

Contact Gaumard and request authorization to return the Gaumard product.  Do NOT return the Gaumard product to Gaumard without 

prior authorization.

  

Upon receiving authorization from Gaumard, send the Gaumard product along with copies of (1) the original bill of sale or receipt and (2) 

this limited warranty document to Gaumard at 14700 SW 136 Street, Miami, FL, 33196-5691 USA.

If the necessary repairs to the Gaumard product are covered by this limited warranty, then the irst purchaser will pay only the incidental expenses 
associated with the repair, including any shipping, handling, and related costs for sending the product to Gaumard and for sending the product back 
to the irst purchaser.  However, if the repairs are not covered by this limited warranty, then the irst purchaser will be liable for all repair costs in 
addition to costs of shipping and handling.

8.2 Extended Warranty

In addition to the standard one year of coverage we ofer a range of service plans through our Gaumard Cares 

program. For more information about Gaumard Cares service planes please contact customer service.

Summary of Contents for PREMIE Blue S108.250






































Reviews: