3.4 LEG ASSEMBLY
1.
To attach the legs, remove the wing nuts,
washers, and springs from the bolts on the hips.
2.
Remove the IM pad from each leg and
slide the leg into the hip joint by inserting
the bolt through the orifice in the leg.
3.
Assemble the fasteners onto the hip bolt in this
order: washer, spring, washer, and wing nut.
4.
Reach through the IM site and tighten the wing
nut until the spring is compressed slightly.
S222 & S222.250 & S222.100
|
USER GUIDE
Initial Setup | 13
