GT510 ATF System Service Centre
9
6.6 Equipment info
It can inquire the serial number and version of the unit.
6.7 Help
It list
warning or alarm information of equipment
of the unit. And provide the simple solution.
6.8 Heat new oil
Preheat the new fluid in the new fluid tank.
Maintenance
Pay attention to each connection to check if there is any leakage during fluid exchange.
When any leak is found, stop the GT510 immediately and check for the unit. Start to
exchange fluid again after reconnection is made.
Before cleaning up the unit, the used fluid should be drained out from the used fluid
tank and the new fluid should be drained out from new tank and stored in container
after every usage to protect the electronic scale is on the no load state at non-work
condition.
Keep the new fluid tank clean.
