Gateway NV-53, Service Manual

Page: 73 / 168

www.gateway.com
67
15
Lift the LCD panel assembly up and away from the notebook.
16
Position the new LCD panel assembly on the notebook, and then secure it
with the hinge screws removed in
step 14 .
17
If the notebook has a wireless card installed, proceed to step 18 to arrange
the antenna cables.
If there’s no wireless card installed, proceed to step 19 to reconnect the
power button board cable.
18
Refer to the antenna cable routing note made on step 9 and secure the
antenna cables to the palm rest before pulling the ends downward to the
wireless card compartment.
19
Arrange the power button cable on the palm rest and reconnect it to its
system board connector.
20
Arrange the
LCD, webcam, and microphone cables
on the palm rest and
reconnect them to their system board connectors.
21
Close the LCD panel and turn the notebook over so the base is facing up.
22
If the notebook has a wireless card installed, reconnect the antenna cables
and then reinstall the bay cover.
23
Return the base hinge screws removed in step 5 .
24
Turn the notebook over so the palm rest is facing up.
25
Reinstall the keyboard and the keyboard cover by performing steps 5 – 8 of
the “Replacing the keyboard” procedure on page 62 .
26
Reinstall the battery.