Gateway NV-53, Service Manual

Page: 98 / 168

CHAPTER 3: Replacing notebook components
92
Replacing the processor
Tools you need to complete this task:
Additional materials you need to complete this task:
•
Soft cloth and isopropyl alcohol; or alcohol pad
•
Thermal grease
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinge - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinge - top)
•
10 M2.5×6 black (palm rest - base side)
•
3 M2.5×6 black (palm rest - top side)
•
1 black M2×4 (system board)
To replace the processor:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Remove the cooling assembly by performing steps 2 – 7 of the “Replacing
the cooling assembly” procedure on page 89 .
3
Remove the barcode sticker on top of the processor.
Phillips #0 screwdriver
Flat screwdriver Non-marring plastic scribe