Gateway MX8711 - Pentium Dual Core 1.6 GHz Reference Manual Download Page 99

Page: 99 / 148

www.gateway.com

Replace the hard drive bay cover, then tighten the cover
screw.

Insert the battery then turn your notebook over.

Connect to the optional port replicator.

-OR-

Connect the power adapter, modem cable, and network
cable

Turn on your notebook, open the DVD drive, insert the
Windows DVD, close the DVD drive, then restart your
notebook.

When the prompt “Press any key to boot from CD
or DVD” appears, press any key on your keyboard and
follow the on-screen instructions. As part of the process
you may be prompted to insert your

Drivers and

Applications Recovery

disc.

Reconnect all peripheral devices and replace any
PC cards.

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz





















































































































































Search results

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz

Reviews:

Brands by name

Popular brands

Gateway MX8711 - Pentium Dual Core 1.6 GHz, Reference Manual

Search results

Summary of Contents for MX8711 - Pentium Dual Core 1.6 GHz

Reviews:

Brands by name

Popular brands